1、清洗或更換電氣箱風扇、熱交換器、油冷機上的空氣濾清網，以保持空氣暢通。

   2、檢查切削油箱內之冷卻液面高度及品質狀態，如果不足或變質，請及時添加更換。

   3、檢查主軸松刀、緊刀動作是否順暢。

   4、清潔暴露在外的極限開關、接近開關以及碰塊。

   5、檢查刀庫凸輪箱油位、齒輪箱油位、油冷機油位是否介于視窗鏡面的一半。

(機器帶有此配置時保養項目)

   6、清潔刀套和刀臂，尤其是夾持部分及刀庫上每一支刀柄。

(機器帶有此配置時保養項目)

II. Weekly Maintenance

   1， Clean or replace the air filter on the electrical box fan, heat exchanger and oil cooler to keep the air flowing

   2, check the cutting oil tank cooling liquid level height and quality status, if insufficient or deterioration, please add replacement.

   3, check the spindle knife loosening, tightening knife action is smooth.

   4, clean the exposed limit switch, proximity switch and touch block.

   5, check the tool library cam box oil level, gear box oil level, oil cooling oil level is between half of the window mirror

(Maintenance items when the machine has this configuration)

   6, clean the knife sleeve and knife arm, especially the clamping part and each knife handle on the knife library.

(Maintenance items when the machine has this configuration)