1、操作者必須閱讀并理解所有的手冊(操作手冊、使用說明書、安全手冊等)

   2、不能夠拆除安全罩、安全開關和其他安全裝置。

   3、在進入機床運轉范圍內清潔、維修及保養前，必須完全關閉主電源。

   6、禁止改變CNC參數的設置，有問題及時與米凱爾售后部門取得聯系。

   8、禁止用手觸碰任何刀具或者鐵屑的切削邊緣。

   9、選擇適當切削方式，禁止對機床進行超負荷操作，比如對工作臺、工件尺寸、刀具尺寸、主軸馬達、各軸馬達等進行機床能力要求之外的操作。

Safety rules

   1, the operator must read and understand all manuals (operating manual, instruction manual, safety manual, etc.)

   2, can not remove the safety cover, safety switches and other safety devices.

   3， Before entering the operating range of the machine for cleaning,repair and maintenance, the main power supply must be completely turned off.

   4, without permission to prohibit touching electrical equipment, the main switch in the open state, prohibit touching electrical equipment.

   5, prohibit wet hands touch switches, buttons and buttons.

6, it is forbidden to change the setting of CNC parameters, and contact the company in time if there is a problem.

   7, keep the environment around the machine clean, clean the oil and coolant in time to prevent slipping.

   8, it is forbidden to touch the cutting edge of any tool or iron filings by hand.

   9, select the appropriate cutting method, prohibit the overload operation of the machine tool, such as the worktable,Work piece size, tool size, spindle motor, spindle motor, etc. Operation beyond the machine capability requirements.