- 資訊分類
- 聯系我們
-
手 機：13790534398
郵 箱：3674034165@qq.com?
地 址：東莞市長安鎮廈崗福海路65號
-
米凱爾數控精雕機安全警告
發布時間：2024-04-23 | 信息來源：東莞市米凱爾數控科技有限公司 | 點擊量：118一、警告
WARNING
機床運轉時請勿進入機床運轉范圍!
機床加油及維護時請勿操作機床!
否則會導致嚴重傷害甚至死亡!
Do not enter the machine operation range when the machine is running!
Do not operate the machine when the machine is being lubricated and maintained！
Or it could lead to serious injury or even death.
二、警告
WARNING
請勿移動安裝裝置及防護!
否則會引起重大事故導致嚴重傷害甚至死亡!
Do not remove mounting and guard!
Otherwise, a major accident could result in serious injury or even death!
三、警告
WARNING刀具回轉時請勿接觸刀具!
否則會引起重大事故導致嚴重傷害甚至死亡!
Do not touch the tool when it is rotating!
Otherwise, a major accident could result in serious injury or even death.
四、警告
WARNING
安全門完全關閉及門鎖正常啟動之前不要操作機床!
否則會引起重大事故導致嚴重傷害甚至死亡!
Do not operate the machine until the safety door is completely closed and the door lock is normally activated.
Otherwise, a major accident could result in serious injury or even death!
五、警告
WARNING
進入機床時請注意機床內的油污及冷卻液，避免滑倒，否則會導致嚴重傷害!
When entering the machine tool, please pay attention to the oil and coolant in the machine tool to avoid slipping, otherwise it will cause serious injury!
六、警告
WARNING
加工期間，不可預期之物可能會飛出造成傷害，請關閉防護門。
During processing, unexpected objects may fly out and cause injury, please close the protective door.
七、警告
WARNING
1.關閉電源后，需要5分鐘主軸才會停止運轉。
2.主軸運轉時請勿開門!
After the power is turned off, it takes 5 minutes for the spindle to stop running.
Do not open the door when the spindle is running!
八、警告
WARNING
使用時請勿超出該轉速，
否則會導致嚴重的人員傷害和設備損壞。
Do not exceed this speed when using,
Failure to do so can result in serious personal injury and equipment damage.
下一篇：米凱爾精雕機安全細則（二）相關資訊
